A new game improvement iron from Alpha/Silver Diamond is being introduced this week to the custom fit and built market. Named the Silver Diamond LX Tour iron. It is designed for the player that needs offset, modern stronger lofts and a medium-wide sole. One of the great factors that are not easily available to the golfing public is that the LX Tour are manufactured with 304 stainless steel and easily adjusted up to 5 degree lie angles. Most cast irons and manufactured with 431 stainless steel and only 2 degree lie adjustments can be made without risk of breakage. Available in both right hand and left hand from 4i thru SW. These LX Tour irons can be custom built with various steel and graphite shafts and various types of grips per the needs of the golfer and NOT break the bank. With the LX Tour irons softer 304SS and the ability of FGCC custom fitting and custom build out these new LX Tour irons will surpass any performance of an off the rack set.
Most golfers know that general golf industry iron loft gaps are 90% of the time in 4 degree loft spacing which may or may not be correct for the distance gap between clubs for you specifically. Clubs are designed and built off the rack and industry wide to fit an average player but that does not take into account what you may need for correct fit and performance. As you can see below if you are a slower to slow-medium club head mid iron swing speed golfer you need different than 4 degree loft gaps in your set. You also maybe able to carry fewer clubs and get better performance with larger loft gap and corresponding distance gaps. All clubs should be fit and lofts adjusted for best performance. There are a few designs also like the Wishon 730CL with 6 degree loft gaps and specially designed high lofted driver, long and high fairway woods, hybrid in 6/7 and 8/9 plus wedges.
These are the mid iron club head speeds…..
mid iron speed over 72 mph – 4* increments (average player)
mid iron speed 60-72 – 5* increments (some seniors and some ladies)
mid iron speed under 60mph – 6* increments (seniors and ladies) Wishon 730CL work perfectly for these club head speeds with skill and ability.
You can make an argument to say that over 85mph you could go with 3* increments but you never do because that will leave you with a very odd set makeup. So over 72mph you stay with 4* and just live with the fact the distance gaps will increase to 15 yds or more as speed keeps going up from 85 with the mid iron.
Think about all these factors when you play golf and possibly why your distance gaps are off and you wonder why.
Swing Science has added to their FC-One Plus line a new driver, fairway, hybrid and putter. This completes the FC-One Plus line! A golfer can be custom fit from driver all the way to putter at a very attractive price.
The new FC-One Plus Driver comes with a 14 deg. 460cc head to help entry level and mid to high hdcp. golfers launch the ball high enough for better carry along with taking off side spin with more loft. The new FC-One Plus Fairway head is 20 deg. and 185cc again not a huge head but large enough for slight off center impact and able to be hit off tight lies on the turf. The FC-One Plus Hybrid is 24 deg. and 130cc for the same reason as the fairway head and blends right into the FC-One Plus royal blue or light blue irons and wedges. All the new heads have the same graphics as the other FC-One Plus line and look very smart. FC-One Plus M Putter is a goose-neck offset mallet head design slightly heavier 375 gram head that golfers prefer. FC-One Plus B model heel/toe Anser style also a 375 gram head for slightly head heavy feel. Both Swing Science FC-One Plus putters come in black PVD color and CNC milled face.
The new driver, fairway and hybrid can all be custom fit with the various Swing Science Legacy shafts for the correct fit for the specific player profile.
I will have these available spring 2018 in various custom fitting options.
The Wishon 318RS hybrid in #3 hybrid at 22 deg., #4 hybrid at 25 deg., and #5 hybrid at 28 deg. Available fitted with Wishon S2S .335 graphite Blue 55 gram, White 70 gram, Black 75 gram and Red 80 gram hybrid shafts. The .335 diameter hosel gets the ball airborne easier and carries for better distance and performance.
A local client Albert H. from Madison, WI took delivery 7/13/17 on his custom fit and custom built Swing Science FC-One Pro Forged satin finish irons 4 – PW shafted with True Temper Dynamic Gold S300 .355 taper and PURE Pro Birdie Blue grips. The Pro Forged irons were custom fit to Series #5 True Length Technology and swing weight heft matched for Albert.
Albert had played Mizuno MP-32 blades in standard length and lie and commented that the new Pro Forged irons were…..“more forgiving on slight miss hits and more solid.” Albert’s general miss was a heavy draw and the new shafts with corrected lie and heft match cut down on his draw and made them more playable.
Swing Science FC-One Plus Fairway and Hybrid heads going into production. These should be available end of August. Designed for the mid to high handicap player. These heads will mate well with the many Swing Science models of shafts especially the Series 200 and 400 graphite shafts. The Plus series follows the FC-One Plus irons and offers a full set up for various player skill levels.
Swing Science has a new adjustable hosel fairway wood that can be fitted and perform well from 13* to 17* lofts with open +3.5* to closed-3.5* face angles and in between. The adjust ability allows various shafts of various shaft profiles and shaft weights to be tested and fit to perform great for the individual golfer.
The black matte finish on the honeycomb crown with a black polished sole are beautiful to use and look at. Swing Science designed this head with a lower CG to get the ball airborne easily and it’s 170cc volume size is easy to hit off tight lies in the fairway or for those players that like a smaller shorter playing length club off the tee.
There is also a matching adjustable hosel Swing Science FC-One A driver.
The top video explains what the correct way to dynamically test your lie angle on your irons and wedges. The bottom video explains why lie boards – LIE. Are your clubs fit this way? If not this is one of the factors you may have in ill fit golf clubs.
One of the reasons, I use True Length Technology or TLT is for the best performing playing length/lie angle correlation. Based on a math model there are 16 Series for adults and 10 Series for juniors. Every golfer fits in one of these TLT Series correctly.
The Swing Science Plus iron is a great alternative for the recreational golfer that needs a bit of help on off center impacts along with sole forgiveness help on “fat” shots. These irons are a great ultra game improvement iron. It comes 5i to PW and the regular FC-One iron can be used from the PW, GW and SW or you can go with the FC-One wedges. Above the 5i one can go with hybrids or for those that are fit best with a matching same iron shaft as in their irons one can choose the FC-One Utility Iron in 3UI, 4UI and 5UI. A number of possibilities exist for the best performance for the individual golfer along with various weight steel and graphite FC-One shafts. These come in 2 colors of blue.
Fitting is done with the same head and various shafts of correct playing length and lie adjustments. Don’t be put off by enormous costs of off the rack irons when you can start with a well fit set of irons for the recreational golfer. (Example a FC-One Plus iron with FC-One 1150i steel and a Swing Science matching Dual Density grip is $45/iron.) Other shafts and grip combinations come at various pricing. Fitting cost extra.
See Jeff Sheets Swing Science technical director video below for a good description.
Swing Science has announced the FC-One Pro forged iron will be added to the Swing Science line up in May 2017. This is good news as the S800 forged iron had been out of the line up for some time.
The FC-One Pro forged head is made using 1025, or SC-25, carbon steel, even softer feeling, and more malleable, than the original S800 series forged released in 2008, which was made using 1035. They will come with a .355 tapered hosel rather than .370 parallel hosel. This allows use of the FC-One Pro iron shaft for players that have a a bit higher mid-iron swing speed with later release for a lower piercing ball flight or the use of Nippon .355 tapered iron shafts for various player swing types. The FC-One Pro forged head will come in a satin finish pictured above or black. I have yet to see the black or know how the finish will wear over time.
The will be a great forged head interesting to mid to low hdcp level players.